双向分束角对称的偏光分束镜设计与性能分析

为了获得分束角对称的偏光分束棱镜，在双Wollaston棱镜结构的基础上，通过合理设计棱镜左右两端晶体光轴的取向，使棱镜整体呈中心切面对称；在保证对正向入射的光对称分束的同时，对反向入射光同样可以对称分束，达到了双向对称分束的目的；在此基础上给出了晶体光轴的旋转角δ与棱镜结构角S以及与波长的关系；并分析了对633 nm设计的棱镜用于其他波长时分束角的对称性.结果表明：在±300 nm的光谱范围内，分束角的不对称度均小于0.24°.     

Geometry of an Accelerated Rotating Disk

We analyze the geometry of a rotating disk with a tangential acceleration in the framework of the theory of Special Relativity, using the kinematic linear differential system that verifies the relative position vector of time-like curves in a Fermi reference. A numerical integration of these equations for a generic initial value problem is made up and the results are compared with those obtained in other works.     

N_2和O_2纯转动拉曼光谱(PRRS)的温度特性

计算了N2 和O2 的PRRS ,讨论了其温度特性。提出通过测量N2 和O2 的PRRS计算大气温度的方法。     

Boundedness and Dissipativity of Truncated Rotations on Uniform Planar Lattices

The finiteness of computer arithmetic can lead to some dramatic differences between the behaviour of a continuous dynamical system and a computer simulation. A thorough rigorous theoretical analysis of what may or what does happen is usually extremely difficult and to date little has been done even in relatively simple contexts. The comparative behaviour of a rotation mapping in the plane and on a uniform lattice in the plane is one such example. Simulations show that the rounding operator applied to a planar rotation mapping more or less preserves the qualitative behaviour of the original mapping, whereas the application of the truncation operator to a planar rotation can lead to quite different dynamical features. In this paper a theoretical justification of the properties of the planar rotation mappings under truncation to a, uniform integer lattice is provided, in particular properties of boundedness and dissipativity are investigated.     

Measurement and prediction of solubilities and diffusion coefficients of carbon dioxide in starch–water mixtures at elevated pressures

The solubility and diffusion coefficient of carbon dioxide in intermediate‐moisture starch–water mixtures were determined both experimentally and theoretically at elevated pressures up to 16 MPa at 50 °C. A high‐pressure decay sorption system was assembled to measure the equilibrium CO₂ mass uptake by the starch–water system. The experimentally measured solubilities accounted for the estimated swollen volume by Sanchez–Lacombe equation of state (S‐L EOS) were found to increase almost linearly with pressure, yielding 4.0 g CO₂/g starch–water system at 16 MPa. Moreover, CO₂ solubilities above 5 MPa displayed a solubility increase, which was not contributed by the water fraction in the starch–water mixture. The solubilities, however, showed no dependence on the degree of gelatinization (DG) of starch. The diffusion coefficient of CO₂ was found to increase with concentration of dissolved CO₂, which is pressure‐dependent, and decrease with increasing DG in the range of 50–100%. A free‐volume‐based diffusion model proposed by Areerat was employed to predict the CO₂ diffusivity in terms of pressure, temperature, and the concentration of dissolved CO₂. S‐L EOS was once more used to determine the specific free volume of the mixture system. The predicted diffusion coefficients showed to correlate well with the measured values for all starch–water mixtures. © 2005 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 44: 607–621, 2006     

锥形模圆柱体超塑性挤压非局部摩擦分析

为了考虑金属材料表面微凸结构对模具与工件接触区域上的非局部摩擦效应,在锥形模圆柱体超塑性挤压加工分析中,采用Oden等提出的非局部摩擦定律代替经典的库仑摩擦定律,利用主应力法或工程法建立了相应问题的积微分形式的力平衡方程.在简化的情况下,采用摄动法求得所论问题的近似解,并分析了影响应力的非局部效应的相关因素.     

Influence of thermal and thermo-mechanical treatment

Two lipids with similar melting ranges but of different composition were analyzed using differential scanning calorimetry and X-ray diffraction. The lipids were processed via extrusion or were tempered at different temperatures; they were analyzed directly after extrusion and after storage at 40°C. Precirol ATO 5® showed high sensitivity to storage time and varied temperature exposure. Extrusion showed only marginal influences on the solid state. Melting peaks were narrower and shifted to higher temperatures in comparison to the untreated powder. Dynasan 114® was more robust, changes in the solid state could only be shown for samples treated above the melting range. Thus, Dynasan 114® is more appropriate for solid lipid extrusion of pharmaceutical products.     

IMPROVED PROPERTIES OF METALLOCENE-CATALYZED LINEAR LOW-DENSITY POLYETHYLENE/POLYPROPYLENE BLENDS DURING ULTRASONIC EXTRUSION

Metallocene-catalyzed linear low-density polyethylene/polypropylene （mLLDPE/PP） blends were prepared by ultrasonic extrusion in this work. Their extrusion processing behaviors were estimated by online measured data, such as the die pressure and flow rate. Crystallization and mechanical properties of the blends were also investigated. The results show that the addition of PP improves the processing behaviors of mLLDPE, but has little effect on its mechanical properties. On the other hand, the addition of mLLDPE improves the impact strength of PP, but has little effect on its processing behavior. The processing behaviors and mechanical properties of mLLDPE/PP blends get further improved due to the presence of ultrasonic oscillation during extrusion. Compared with PP-rich blends, the apparent viscosity drop of mLLDPE-rich blends is more sensitive to ultrasonic oscillation. The ultrasonic oscillation affects the crystal nucleation, while barely the other crystalline behaviors of the blends.     

预辐射聚丙烯反应挤出接枝丙烯酸的研究

利用电子束(EB)预辐照方法和反应挤出技术制备了聚丙烯接枝丙烯酸共聚物PP-g-AA. 采用化学滴定、红外光谱、偏光显微镜(PLM)、DSC和广角X射线衍射(WAXD)对接枝产物进行了表征. 研究结果表明, 接枝率随辐照剂量增加而增大并逐渐达到平台值, 但随单体浓度增大而表现为线性增加, 接枝链能起到异相成核作用, 从而提高了结晶速率并细化了球晶. 同时, 熔体流动速率(MFR)和力学性能测试结果表明, 预辐射和挤出过程造成了PP严重降解, 据此可认为接枝反应主要发生在聚丙烯断裂分子链的末端.